This file contains all the functions prototypes for the SDIO firmware library. More...

#include "stm32f10x.h"

Classes
struct	SDIO_InitTypeDef

struct	SDIO_CmdInitTypeDef

struct	SDIO_DataInitTypeDef

Macros
#define	SDIO_ClockEdge_Rising ((uint32_t)0x00000000)

#define	SDIO_ClockEdge_Falling ((uint32_t)0x00002000)

#define	IS_SDIO_CLOCK_EDGE(EDGE)

#define	SDIO_ClockBypass_Disable ((uint32_t)0x00000000)

#define	SDIO_ClockBypass_Enable ((uint32_t)0x00000400)

#define	IS_SDIO_CLOCK_BYPASS(BYPASS)

#define	SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000)

#define	SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200)

#define	IS_SDIO_CLOCK_POWER_SAVE(SAVE)

#define	SDIO_BusWide_1b ((uint32_t)0x00000000)

#define	SDIO_BusWide_4b ((uint32_t)0x00000800)

#define	SDIO_BusWide_8b ((uint32_t)0x00001000)

#define	IS_SDIO_BUS_WIDE(WIDE)

#define	SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000)

#define	SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000)

#define	IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL)

#define	SDIO_PowerState_OFF ((uint32_t)0x00000000)

#define	SDIO_PowerState_ON ((uint32_t)0x00000003)

#define	IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) \|\| ((STATE) == SDIO_PowerState_ON))

#define	SDIO_IT_CCRCFAIL ((uint32_t)0x00000001)

#define	SDIO_IT_DCRCFAIL ((uint32_t)0x00000002)

#define	SDIO_IT_CTIMEOUT ((uint32_t)0x00000004)

#define	SDIO_IT_DTIMEOUT ((uint32_t)0x00000008)

#define	SDIO_IT_TXUNDERR ((uint32_t)0x00000010)

#define	SDIO_IT_RXOVERR ((uint32_t)0x00000020)

#define	SDIO_IT_CMDREND ((uint32_t)0x00000040)

#define	SDIO_IT_CMDSENT ((uint32_t)0x00000080)

#define	SDIO_IT_DATAEND ((uint32_t)0x00000100)

#define	SDIO_IT_STBITERR ((uint32_t)0x00000200)

#define	SDIO_IT_DBCKEND ((uint32_t)0x00000400)

#define	SDIO_IT_CMDACT ((uint32_t)0x00000800)

#define	SDIO_IT_TXACT ((uint32_t)0x00001000)

#define	SDIO_IT_RXACT ((uint32_t)0x00002000)

#define	SDIO_IT_TXFIFOHE ((uint32_t)0x00004000)

#define	SDIO_IT_RXFIFOHF ((uint32_t)0x00008000)

#define	SDIO_IT_TXFIFOF ((uint32_t)0x00010000)

#define	SDIO_IT_RXFIFOF ((uint32_t)0x00020000)

#define	SDIO_IT_TXFIFOE ((uint32_t)0x00040000)

#define	SDIO_IT_RXFIFOE ((uint32_t)0x00080000)

#define	SDIO_IT_TXDAVL ((uint32_t)0x00100000)

#define	SDIO_IT_RXDAVL ((uint32_t)0x00200000)

#define	SDIO_IT_SDIOIT ((uint32_t)0x00400000)

#define	SDIO_IT_CEATAEND ((uint32_t)0x00800000)

#define	IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00))

#define	IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40)

#define	SDIO_Response_No ((uint32_t)0x00000000)

#define	SDIO_Response_Short ((uint32_t)0x00000040)

#define	SDIO_Response_Long ((uint32_t)0x000000C0)

#define	IS_SDIO_RESPONSE(RESPONSE)

#define	SDIO_Wait_No ((uint32_t)0x00000000)

#define	SDIO_Wait_IT ((uint32_t)0x00000100)

#define	SDIO_Wait_Pend ((uint32_t)0x00000200)

#define	IS_SDIO_WAIT(WAIT)

#define	SDIO_CPSM_Disable ((uint32_t)0x00000000)

#define	SDIO_CPSM_Enable ((uint32_t)0x00000400)

#define	IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) \|\| ((CPSM) == SDIO_CPSM_Disable))

#define	SDIO_RESP1 ((uint32_t)0x00000000)

#define	SDIO_RESP2 ((uint32_t)0x00000004)

#define	SDIO_RESP3 ((uint32_t)0x00000008)

#define	SDIO_RESP4 ((uint32_t)0x0000000C)

#define	IS_SDIO_RESP(RESP)

#define	IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF)

#define	SDIO_DataBlockSize_1b ((uint32_t)0x00000000)

#define	SDIO_DataBlockSize_2b ((uint32_t)0x00000010)

#define	SDIO_DataBlockSize_4b ((uint32_t)0x00000020)

#define	SDIO_DataBlockSize_8b ((uint32_t)0x00000030)

#define	SDIO_DataBlockSize_16b ((uint32_t)0x00000040)

#define	SDIO_DataBlockSize_32b ((uint32_t)0x00000050)

#define	SDIO_DataBlockSize_64b ((uint32_t)0x00000060)

#define	SDIO_DataBlockSize_128b ((uint32_t)0x00000070)

#define	SDIO_DataBlockSize_256b ((uint32_t)0x00000080)

#define	SDIO_DataBlockSize_512b ((uint32_t)0x00000090)

#define	SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0)

#define	SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0)

#define	SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0)

#define	SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0)

#define	SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0)

#define	IS_SDIO_BLOCK_SIZE(SIZE)

#define	SDIO_TransferDir_ToCard ((uint32_t)0x00000000)

#define	SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002)

#define	IS_SDIO_TRANSFER_DIR(DIR)

#define	SDIO_TransferMode_Block ((uint32_t)0x00000000)

#define	SDIO_TransferMode_Stream ((uint32_t)0x00000004)

#define	IS_SDIO_TRANSFER_MODE(MODE)

#define	SDIO_DPSM_Disable ((uint32_t)0x00000000)

#define	SDIO_DPSM_Enable ((uint32_t)0x00000001)

#define	IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) \|\| ((DPSM) == SDIO_DPSM_Disable))

#define	SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001)

#define	SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002)

#define	SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004)

#define	SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008)

#define	SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010)

#define	SDIO_FLAG_RXOVERR ((uint32_t)0x00000020)

#define	SDIO_FLAG_CMDREND ((uint32_t)0x00000040)

#define	SDIO_FLAG_CMDSENT ((uint32_t)0x00000080)

#define	SDIO_FLAG_DATAEND ((uint32_t)0x00000100)

#define	SDIO_FLAG_STBITERR ((uint32_t)0x00000200)

#define	SDIO_FLAG_DBCKEND ((uint32_t)0x00000400)

#define	SDIO_FLAG_CMDACT ((uint32_t)0x00000800)

#define	SDIO_FLAG_TXACT ((uint32_t)0x00001000)

#define	SDIO_FLAG_RXACT ((uint32_t)0x00002000)

#define	SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000)

#define	SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000)

#define	SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000)

#define	SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000)

#define	SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000)

#define	SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000)

#define	SDIO_FLAG_TXDAVL ((uint32_t)0x00100000)

#define	SDIO_FLAG_RXDAVL ((uint32_t)0x00200000)

#define	SDIO_FLAG_SDIOIT ((uint32_t)0x00400000)

#define	SDIO_FLAG_CEATAEND ((uint32_t)0x00800000)

#define	IS_SDIO_FLAG(FLAG)

#define	IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00))

#define	IS_SDIO_GET_IT(IT)

#define	IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00))

#define	SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001)

#define	SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000)

#define	IS_SDIO_READWAIT_MODE(MODE)

Functions
void	SDIO_DeInit (void)
	Deinitializes the SDIO peripheral registers to their default reset values. More...

void	SDIO_Init (SDIO_InitTypeDef *SDIO_InitStruct)
	Initializes the SDIO peripheral according to the specified parameters in the SDIO_InitStruct. More...

void	SDIO_StructInit (SDIO_InitTypeDef *SDIO_InitStruct)
	Fills each SDIO_InitStruct member with its default value. More...

void	SDIO_ClockCmd (FunctionalState NewState)
	Enables or disables the SDIO Clock. More...

void	SDIO_SetPowerState (uint32_t SDIO_PowerState)
	Sets the power status of the controller. More...

uint32_t	SDIO_GetPowerState (void)
	Gets the power status of the controller. More...

void	SDIO_ITConfig (uint32_t SDIO_IT, FunctionalState NewState)
	Enables or disables the SDIO interrupts. More...

void	SDIO_DMACmd (FunctionalState NewState)
	Enables or disables the SDIO DMA request. More...

void	SDIO_SendCommand (SDIO_CmdInitTypeDef *SDIO_CmdInitStruct)
	Initializes the SDIO Command according to the specified parameters in the SDIO_CmdInitStruct and send the command. More...

void	SDIO_CmdStructInit (SDIO_CmdInitTypeDef *SDIO_CmdInitStruct)
	Fills each SDIO_CmdInitStruct member with its default value. More...

uint8_t	SDIO_GetCommandResponse (void)
	Returns command index of last command for which response received. More...

uint32_t	SDIO_GetResponse (uint32_t SDIO_RESP)
	Returns response received from the card for the last command. More...

void	SDIO_DataConfig (SDIO_DataInitTypeDef *SDIO_DataInitStruct)
	Initializes the SDIO data path according to the specified parameters in the SDIO_DataInitStruct. More...

void	SDIO_DataStructInit (SDIO_DataInitTypeDef *SDIO_DataInitStruct)
	Fills each SDIO_DataInitStruct member with its default value. More...

uint32_t	SDIO_GetDataCounter (void)
	Returns number of remaining data bytes to be transferred. More...

uint32_t	SDIO_ReadData (void)
	Read one data word from Rx FIFO. More...

void	SDIO_WriteData (uint32_t Data)
	Write one data word to Tx FIFO. More...

uint32_t	SDIO_GetFIFOCount (void)
	Returns the number of words left to be written to or read from FIFO. More...

void	SDIO_StartSDIOReadWait (FunctionalState NewState)
	Starts the SD I/O Read Wait operation. More...

void	SDIO_StopSDIOReadWait (FunctionalState NewState)
	Stops the SD I/O Read Wait operation. More...

void	SDIO_SetSDIOReadWaitMode (uint32_t SDIO_ReadWaitMode)
	Sets one of the two options of inserting read wait interval. More...

void	SDIO_SetSDIOOperation (FunctionalState NewState)
	Enables or disables the SD I/O Mode Operation. More...

void	SDIO_SendSDIOSuspendCmd (FunctionalState NewState)
	Enables or disables the SD I/O Mode suspend command sending. More...

void	SDIO_CommandCompletionCmd (FunctionalState NewState)
	Enables or disables the command completion signal. More...

void	SDIO_CEATAITCmd (FunctionalState NewState)
	Enables or disables the CE-ATA interrupt. More...

void	SDIO_SendCEATACmd (FunctionalState NewState)
	Sends CE-ATA command (CMD61). More...

FlagStatus	SDIO_GetFlagStatus (uint32_t SDIO_FLAG)
	Checks whether the specified SDIO flag is set or not. More...

void	SDIO_ClearFlag (uint32_t SDIO_FLAG)
	Clears the SDIO's pending flags. More...

ITStatus	SDIO_GetITStatus (uint32_t SDIO_IT)
	Checks whether the specified SDIO interrupt has occurred or not. More...

void	SDIO_ClearITPendingBit (uint32_t SDIO_IT)
	Clears the SDIO's interrupt pending bits. More...

Detailed Description

This file contains all the functions prototypes for the SDIO firmware library.

Author: MCD Application Team

Version: V3.5.0

Date: 11-March-2011

Attention

THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

Definition in file stm32f10x_sdio.h.

Classes

Macros

Functions

Detailed Description

© COPYRIGHT 2011 STMicroelectronics