|
uc-sdk
|
|
uc-sdk
|
This file contains all the functions prototypes for the I2C firmware library. More...
#include "stm32f10x.h"Go to the source code of this file.
Classes | |
| struct | I2C_InitTypeDef |
| I2C Init structure definition. More... | |
Macros | |
| #define | IS_I2C_ALL_PERIPH(PERIPH) |
| #define | I2C_Mode_I2C ((uint16_t)0x0000) |
| #define | I2C_Mode_SMBusDevice ((uint16_t)0x0002) |
| #define | I2C_Mode_SMBusHost ((uint16_t)0x000A) |
| #define | IS_I2C_MODE(MODE) |
| #define | I2C_DutyCycle_16_9 ((uint16_t)0x4000) |
| #define | I2C_DutyCycle_2 ((uint16_t)0xBFFF) |
| #define | IS_I2C_DUTY_CYCLE(CYCLE) |
| #define | I2C_Ack_Enable ((uint16_t)0x0400) |
| #define | I2C_Ack_Disable ((uint16_t)0x0000) |
| #define | IS_I2C_ACK_STATE(STATE) |
| #define | I2C_Direction_Transmitter ((uint8_t)0x00) |
| #define | I2C_Direction_Receiver ((uint8_t)0x01) |
| #define | IS_I2C_DIRECTION(DIRECTION) |
| #define | I2C_AcknowledgedAddress_7bit ((uint16_t)0x4000) |
| #define | I2C_AcknowledgedAddress_10bit ((uint16_t)0xC000) |
| #define | IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) |
| #define | I2C_Register_CR1 ((uint8_t)0x00) |
| #define | I2C_Register_CR2 ((uint8_t)0x04) |
| #define | I2C_Register_OAR1 ((uint8_t)0x08) |
| #define | I2C_Register_OAR2 ((uint8_t)0x0C) |
| #define | I2C_Register_DR ((uint8_t)0x10) |
| #define | I2C_Register_SR1 ((uint8_t)0x14) |
| #define | I2C_Register_SR2 ((uint8_t)0x18) |
| #define | I2C_Register_CCR ((uint8_t)0x1C) |
| #define | I2C_Register_TRISE ((uint8_t)0x20) |
| #define | IS_I2C_REGISTER(REGISTER) |
| #define | I2C_SMBusAlert_Low ((uint16_t)0x2000) |
| #define | I2C_SMBusAlert_High ((uint16_t)0xDFFF) |
| #define | IS_I2C_SMBUS_ALERT(ALERT) |
| #define | I2C_PECPosition_Next ((uint16_t)0x0800) |
| #define | I2C_PECPosition_Current ((uint16_t)0xF7FF) |
| #define | IS_I2C_PEC_POSITION(POSITION) |
| #define | I2C_NACKPosition_Next ((uint16_t)0x0800) |
| #define | I2C_NACKPosition_Current ((uint16_t)0xF7FF) |
| #define | IS_I2C_NACK_POSITION(POSITION) |
| #define | I2C_IT_BUF ((uint16_t)0x0400) |
| #define | I2C_IT_EVT ((uint16_t)0x0200) |
| #define | I2C_IT_ERR ((uint16_t)0x0100) |
| #define | IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00)) |
| #define | I2C_IT_SMBALERT ((uint32_t)0x01008000) |
| #define | I2C_IT_TIMEOUT ((uint32_t)0x01004000) |
| #define | I2C_IT_PECERR ((uint32_t)0x01001000) |
| #define | I2C_IT_OVR ((uint32_t)0x01000800) |
| #define | I2C_IT_AF ((uint32_t)0x01000400) |
| #define | I2C_IT_ARLO ((uint32_t)0x01000200) |
| #define | I2C_IT_BERR ((uint32_t)0x01000100) |
| #define | I2C_IT_TXE ((uint32_t)0x06000080) |
| #define | I2C_IT_RXNE ((uint32_t)0x06000040) |
| #define | I2C_IT_STOPF ((uint32_t)0x02000010) |
| #define | I2C_IT_ADD10 ((uint32_t)0x02000008) |
| #define | I2C_IT_BTF ((uint32_t)0x02000004) |
| #define | I2C_IT_ADDR ((uint32_t)0x02000002) |
| #define | I2C_IT_SB ((uint32_t)0x02000001) |
| #define | IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00)) |
| #define | IS_I2C_GET_IT(IT) |
| #define | I2C_FLAG_DUALF ((uint32_t)0x00800000) |
| SR2 register flags. More... | |
| #define | I2C_FLAG_SMBHOST ((uint32_t)0x00400000) |
| #define | I2C_FLAG_SMBDEFAULT ((uint32_t)0x00200000) |
| #define | I2C_FLAG_GENCALL ((uint32_t)0x00100000) |
| #define | I2C_FLAG_TRA ((uint32_t)0x00040000) |
| #define | I2C_FLAG_BUSY ((uint32_t)0x00020000) |
| #define | I2C_FLAG_MSL ((uint32_t)0x00010000) |
| #define | I2C_FLAG_SMBALERT ((uint32_t)0x10008000) |
| SR1 register flags. More... | |
| #define | I2C_FLAG_TIMEOUT ((uint32_t)0x10004000) |
| #define | I2C_FLAG_PECERR ((uint32_t)0x10001000) |
| #define | I2C_FLAG_OVR ((uint32_t)0x10000800) |
| #define | I2C_FLAG_AF ((uint32_t)0x10000400) |
| #define | I2C_FLAG_ARLO ((uint32_t)0x10000200) |
| #define | I2C_FLAG_BERR ((uint32_t)0x10000100) |
| #define | I2C_FLAG_TXE ((uint32_t)0x10000080) |
| #define | I2C_FLAG_RXNE ((uint32_t)0x10000040) |
| #define | I2C_FLAG_STOPF ((uint32_t)0x10000010) |
| #define | I2C_FLAG_ADD10 ((uint32_t)0x10000008) |
| #define | I2C_FLAG_BTF ((uint32_t)0x10000004) |
| #define | I2C_FLAG_ADDR ((uint32_t)0x10000002) |
| #define | I2C_FLAG_SB ((uint32_t)0x10000001) |
| #define | IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0x20FF) == 0x00) && ((FLAG) != (uint16_t)0x00)) |
| #define | IS_I2C_GET_FLAG(FLAG) |
| #define | I2C_EVENT_MASTER_MODE_SELECT ((uint32_t)0x00030001) /* BUSY, MSL and SB flag */ |
| Communication start. More... | |
| #define | I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((uint32_t)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */ |
| Address Acknowledge. More... | |
| #define | I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((uint32_t)0x00030002) /* BUSY, MSL and ADDR flags */ |
| #define | I2C_EVENT_MASTER_MODE_ADDRESS10 ((uint32_t)0x00030008) /* BUSY, MSL and ADD10 flags */ |
| #define | I2C_EVENT_MASTER_BYTE_RECEIVED ((uint32_t)0x00030040) /* BUSY, MSL and RXNE flags */ |
| Communication events. More... | |
| #define | I2C_EVENT_MASTER_BYTE_TRANSMITTING ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */ |
| #define | I2C_EVENT_MASTER_BYTE_TRANSMITTED ((uint32_t)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */ |
| #define | I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */ |
| Communication start events. More... | |
| #define | I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */ |
| #define | I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((uint32_t)0x00820000) /* DUALF and BUSY flags */ |
| #define | I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080) /* DUALF, TRA, BUSY and TXE flags */ |
| #define | I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((uint32_t)0x00120000) /* GENCALL and BUSY flags */ |
| #define | I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */ |
| Communication events. More... | |
| #define | I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */ |
| #define | I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */ |
| #define | I2C_EVENT_SLAVE_BYTE_TRANSMITTING ((uint32_t)0x00060080) /* TRA, BUSY and TXE flags */ |
| #define | I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */ |
| #define | IS_I2C_EVENT(EVENT) |
| #define | IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF) |
| #define | IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000)) |
Functions | |
| void | I2C_DeInit (I2C_TypeDef *I2Cx) |
| Deinitializes the I2Cx peripheral registers to their default reset values. More... | |
| void | I2C_Init (I2C_TypeDef *I2Cx, I2C_InitTypeDef *I2C_InitStruct) |
| Initializes the I2Cx peripheral according to the specified parameters in the I2C_InitStruct. More... | |
| void | I2C_StructInit (I2C_InitTypeDef *I2C_InitStruct) |
| Fills each I2C_InitStruct member with its default value. More... | |
| void | I2C_Cmd (I2C_TypeDef *I2Cx, FunctionalState NewState) |
| Enables or disables the specified I2C peripheral. More... | |
| void | I2C_DMACmd (I2C_TypeDef *I2Cx, FunctionalState NewState) |
| Enables or disables the specified I2C DMA requests. More... | |
| void | I2C_DMALastTransferCmd (I2C_TypeDef *I2Cx, FunctionalState NewState) |
| Specifies if the next DMA transfer will be the last one. More... | |
| void | I2C_GenerateSTART (I2C_TypeDef *I2Cx, FunctionalState NewState) |
| Generates I2Cx communication START condition. More... | |
| void | I2C_GenerateSTOP (I2C_TypeDef *I2Cx, FunctionalState NewState) |
| Generates I2Cx communication STOP condition. More... | |
| void | I2C_AcknowledgeConfig (I2C_TypeDef *I2Cx, FunctionalState NewState) |
| Enables or disables the specified I2C acknowledge feature. More... | |
| void | I2C_OwnAddress2Config (I2C_TypeDef *I2Cx, uint8_t Address) |
| Configures the specified I2C own address2. More... | |
| void | I2C_DualAddressCmd (I2C_TypeDef *I2Cx, FunctionalState NewState) |
| Enables or disables the specified I2C dual addressing mode. More... | |
| void | I2C_GeneralCallCmd (I2C_TypeDef *I2Cx, FunctionalState NewState) |
| Enables or disables the specified I2C general call feature. More... | |
| void | I2C_ITConfig (I2C_TypeDef *I2Cx, uint16_t I2C_IT, FunctionalState NewState) |
| Enables or disables the specified I2C interrupts. More... | |
| void | I2C_SendData (I2C_TypeDef *I2Cx, uint8_t Data) |
| Sends a data byte through the I2Cx peripheral. More... | |
| uint8_t | I2C_ReceiveData (I2C_TypeDef *I2Cx) |
| Returns the most recent received data by the I2Cx peripheral. More... | |
| void | I2C_Send7bitAddress (I2C_TypeDef *I2Cx, uint8_t Address, uint8_t I2C_Direction) |
| Transmits the address byte to select the slave device. More... | |
| uint16_t | I2C_ReadRegister (I2C_TypeDef *I2Cx, uint8_t I2C_Register) |
| Reads the specified I2C register and returns its value. More... | |
| void | I2C_SoftwareResetCmd (I2C_TypeDef *I2Cx, FunctionalState NewState) |
| Enables or disables the specified I2C software reset. More... | |
| void | I2C_NACKPositionConfig (I2C_TypeDef *I2Cx, uint16_t I2C_NACKPosition) |
| Selects the specified I2C NACK position in master receiver mode. This function is useful in I2C Master Receiver mode when the number of data to be received is equal to 2. In this case, this function should be called (with parameter I2C_NACKPosition_Next) before data reception starts,as described in the 2-byte reception procedure recommended in Reference Manual in Section: Master receiver. More... | |
| void | I2C_SMBusAlertConfig (I2C_TypeDef *I2Cx, uint16_t I2C_SMBusAlert) |
| Drives the SMBusAlert pin high or low for the specified I2C. More... | |
| void | I2C_TransmitPEC (I2C_TypeDef *I2Cx, FunctionalState NewState) |
| Enables or disables the specified I2C PEC transfer. More... | |
| void | I2C_PECPositionConfig (I2C_TypeDef *I2Cx, uint16_t I2C_PECPosition) |
| Selects the specified I2C PEC position. More... | |
| void | I2C_CalculatePEC (I2C_TypeDef *I2Cx, FunctionalState NewState) |
| Enables or disables the PEC value calculation of the transferred bytes. More... | |
| uint8_t | I2C_GetPEC (I2C_TypeDef *I2Cx) |
| Returns the PEC value for the specified I2C. More... | |
| void | I2C_ARPCmd (I2C_TypeDef *I2Cx, FunctionalState NewState) |
| Enables or disables the specified I2C ARP. More... | |
| void | I2C_StretchClockCmd (I2C_TypeDef *I2Cx, FunctionalState NewState) |
| Enables or disables the specified I2C Clock stretching. More... | |
| void | I2C_FastModeDutyCycleConfig (I2C_TypeDef *I2Cx, uint16_t I2C_DutyCycle) |
| Selects the specified I2C fast mode duty cycle. More... | |
| ErrorStatus | I2C_CheckEvent (I2C_TypeDef *I2Cx, uint32_t I2C_EVENT) |
| I2C State Monitoring Functions. More... | |
| uint32_t | I2C_GetLastEvent (I2C_TypeDef *I2Cx) |
| Returns the last I2Cx Event. More... | |
| FlagStatus | I2C_GetFlagStatus (I2C_TypeDef *I2Cx, uint32_t I2C_FLAG) |
| Checks whether the specified I2C flag is set or not. More... | |
| void | I2C_ClearFlag (I2C_TypeDef *I2Cx, uint32_t I2C_FLAG) |
| Clears the I2Cx's pending flags. More... | |
| ITStatus | I2C_GetITStatus (I2C_TypeDef *I2Cx, uint32_t I2C_IT) |
| Checks whether the specified I2C interrupt has occurred or not. More... | |
| void | I2C_ClearITPendingBit (I2C_TypeDef *I2Cx, uint32_t I2C_IT) |
| Clears the I2Cx’s interrupt pending bits. More... | |
This file contains all the functions prototypes for the I2C firmware library.
THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
Definition in file stm32f10x_i2c.h.
1.8.4