uc-sdk
 All Classes Files Functions Variables Typedefs Enumerations Enumerator Macros Groups Pages
DMA_Exported_Functions

Functions

void DMA_DeInit (DMA_Channel_TypeDef *DMAy_Channelx)
 Deinitializes the DMAy Channelx registers to their default reset values. More...
 
void DMA_Init (DMA_Channel_TypeDef *DMAy_Channelx, DMA_InitTypeDef *DMA_InitStruct)
 Initializes the DMAy Channelx according to the specified parameters in the DMA_InitStruct. More...
 
void DMA_StructInit (DMA_InitTypeDef *DMA_InitStruct)
 Fills each DMA_InitStruct member with its default value. More...
 
void DMA_Cmd (DMA_Channel_TypeDef *DMAy_Channelx, FunctionalState NewState)
 Enables or disables the specified DMAy Channelx. More...
 
void DMA_ITConfig (DMA_Channel_TypeDef *DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState)
 Enables or disables the specified DMAy Channelx interrupts. More...
 
void DMA_SetCurrDataCounter (DMA_Channel_TypeDef *DMAy_Channelx, uint16_t DataNumber)
 Sets the number of data units in the current DMAy Channelx transfer. More...
 
uint16_t DMA_GetCurrDataCounter (DMA_Channel_TypeDef *DMAy_Channelx)
 Returns the number of remaining data units in the current DMAy Channelx transfer. More...
 
FlagStatus DMA_GetFlagStatus (uint32_t DMAy_FLAG)
 Checks whether the specified DMAy Channelx flag is set or not. More...
 
void DMA_ClearFlag (uint32_t DMAy_FLAG)
 Clears the DMAy Channelx's pending flags. More...
 
ITStatus DMA_GetITStatus (uint32_t DMAy_IT)
 Checks whether the specified DMAy Channelx interrupt has occurred or not. More...
 
void DMA_ClearITPendingBit (uint32_t DMAy_IT)
 Clears the DMAy Channelx's interrupt pending bits. More...
 

Detailed Description

Function Documentation

void DMA_ClearFlag ( uint32_t  DMAy_FLAG)

Clears the DMAy Channelx's pending flags.

Parameters
DMAy_FLAG,:specifies the flag to clear. This parameter can be any combination (for the same DMA) of the following values:
  • DMA1_FLAG_GL1: DMA1 Channel1 global flag.
  • DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag.
  • DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag.
  • DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag.
  • DMA1_FLAG_GL2: DMA1 Channel2 global flag.
  • DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag.
  • DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag.
  • DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag.
  • DMA1_FLAG_GL3: DMA1 Channel3 global flag.
  • DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag.
  • DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag.
  • DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag.
  • DMA1_FLAG_GL4: DMA1 Channel4 global flag.
  • DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag.
  • DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag.
  • DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag.
  • DMA1_FLAG_GL5: DMA1 Channel5 global flag.
  • DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag.
  • DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag.
  • DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag.
  • DMA1_FLAG_GL6: DMA1 Channel6 global flag.
  • DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag.
  • DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag.
  • DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag.
  • DMA1_FLAG_GL7: DMA1 Channel7 global flag.
  • DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag.
  • DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag.
  • DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag.
  • DMA2_FLAG_GL1: DMA2 Channel1 global flag.
  • DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag.
  • DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag.
  • DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag.
  • DMA2_FLAG_GL2: DMA2 Channel2 global flag.
  • DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag.
  • DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag.
  • DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag.
  • DMA2_FLAG_GL3: DMA2 Channel3 global flag.
  • DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag.
  • DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag.
  • DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag.
  • DMA2_FLAG_GL4: DMA2 Channel4 global flag.
  • DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag.
  • DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag.
  • DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag.
  • DMA2_FLAG_GL5: DMA2 Channel5 global flag.
  • DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag.
  • DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag.
  • DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag.
Return values
None

Definition at line 523 of file stm32f10x_dma.c.

void DMA_ClearITPendingBit ( uint32_t  DMAy_IT)

Clears the DMAy Channelx's interrupt pending bits.

Parameters
DMAy_IT,:specifies the DMAy interrupt pending bit to clear. This parameter can be any combination (for the same DMA) of the following values:
  • DMA1_IT_GL1: DMA1 Channel1 global interrupt.
  • DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt.
  • DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt.
  • DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt.
  • DMA1_IT_GL2: DMA1 Channel2 global interrupt.
  • DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt.
  • DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt.
  • DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt.
  • DMA1_IT_GL3: DMA1 Channel3 global interrupt.
  • DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt.
  • DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt.
  • DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt.
  • DMA1_IT_GL4: DMA1 Channel4 global interrupt.
  • DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt.
  • DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt.
  • DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt.
  • DMA1_IT_GL5: DMA1 Channel5 global interrupt.
  • DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt.
  • DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt.
  • DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt.
  • DMA1_IT_GL6: DMA1 Channel6 global interrupt.
  • DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt.
  • DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt.
  • DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt.
  • DMA1_IT_GL7: DMA1 Channel7 global interrupt.
  • DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt.
  • DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt.
  • DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt.
  • DMA2_IT_GL1: DMA2 Channel1 global interrupt.
  • DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt.
  • DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt.
  • DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt.
  • DMA2_IT_GL2: DMA2 Channel2 global interrupt.
  • DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt.
  • DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt.
  • DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt.
  • DMA2_IT_GL3: DMA2 Channel3 global interrupt.
  • DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt.
  • DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt.
  • DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt.
  • DMA2_IT_GL4: DMA2 Channel4 global interrupt.
  • DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt.
  • DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt.
  • DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt.
  • DMA2_IT_GL5: DMA2 Channel5 global interrupt.
  • DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt.
  • DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt.
  • DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt.
Return values
None

Definition at line 684 of file stm32f10x_dma.c.

void DMA_Cmd ( DMA_Channel_TypeDef DMAy_Channelx,
FunctionalState  NewState 
)

Enables or disables the specified DMAy Channelx.

Parameters
DMAy_Channelx,:where y can be 1 or 2 to select the DMA and x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
NewState,:new state of the DMAy Channelx. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 294 of file stm32f10x_dma.c.

void DMA_DeInit ( DMA_Channel_TypeDef DMAy_Channelx)

Deinitializes the DMAy Channelx registers to their default reset values.

Parameters
DMAy_Channelx,:where y can be 1 or 2 to select the DMA and x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
Return values
None

Definition at line 108 of file stm32f10x_dma.c.

uint16_t DMA_GetCurrDataCounter ( DMA_Channel_TypeDef DMAy_Channelx)

Returns the number of remaining data units in the current DMAy Channelx transfer.

Parameters
DMAy_Channelx,:where y can be 1 or 2 to select the DMA and x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
Return values
Thenumber of remaining data units in the current DMAy Channelx transfer.

Definition at line 371 of file stm32f10x_dma.c.

FlagStatus DMA_GetFlagStatus ( uint32_t  DMAy_FLAG)

Checks whether the specified DMAy Channelx flag is set or not.

Parameters
DMAy_FLAG,:specifies the flag to check. This parameter can be one of the following values:
  • DMA1_FLAG_GL1: DMA1 Channel1 global flag.
  • DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag.
  • DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag.
  • DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag.
  • DMA1_FLAG_GL2: DMA1 Channel2 global flag.
  • DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag.
  • DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag.
  • DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag.
  • DMA1_FLAG_GL3: DMA1 Channel3 global flag.
  • DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag.
  • DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag.
  • DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag.
  • DMA1_FLAG_GL4: DMA1 Channel4 global flag.
  • DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag.
  • DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag.
  • DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag.
  • DMA1_FLAG_GL5: DMA1 Channel5 global flag.
  • DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag.
  • DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag.
  • DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag.
  • DMA1_FLAG_GL6: DMA1 Channel6 global flag.
  • DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag.
  • DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag.
  • DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag.
  • DMA1_FLAG_GL7: DMA1 Channel7 global flag.
  • DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag.
  • DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag.
  • DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag.
  • DMA2_FLAG_GL1: DMA2 Channel1 global flag.
  • DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag.
  • DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag.
  • DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag.
  • DMA2_FLAG_GL2: DMA2 Channel2 global flag.
  • DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag.
  • DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag.
  • DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag.
  • DMA2_FLAG_GL3: DMA2 Channel3 global flag.
  • DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag.
  • DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag.
  • DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag.
  • DMA2_FLAG_GL4: DMA2 Channel4 global flag.
  • DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag.
  • DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag.
  • DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag.
  • DMA2_FLAG_GL5: DMA2 Channel5 global flag.
  • DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag.
  • DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag.
  • DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag.
Return values
Thenew state of DMAy_FLAG (SET or RESET).

Definition at line 433 of file stm32f10x_dma.c.

ITStatus DMA_GetITStatus ( uint32_t  DMAy_IT)

Checks whether the specified DMAy Channelx interrupt has occurred or not.

Parameters
DMAy_IT,:specifies the DMAy interrupt source to check. This parameter can be one of the following values:
  • DMA1_IT_GL1: DMA1 Channel1 global interrupt.
  • DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt.
  • DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt.
  • DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt.
  • DMA1_IT_GL2: DMA1 Channel2 global interrupt.
  • DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt.
  • DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt.
  • DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt.
  • DMA1_IT_GL3: DMA1 Channel3 global interrupt.
  • DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt.
  • DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt.
  • DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt.
  • DMA1_IT_GL4: DMA1 Channel4 global interrupt.
  • DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt.
  • DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt.
  • DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt.
  • DMA1_IT_GL5: DMA1 Channel5 global interrupt.
  • DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt.
  • DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt.
  • DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt.
  • DMA1_IT_GL6: DMA1 Channel6 global interrupt.
  • DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt.
  • DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt.
  • DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt.
  • DMA1_IT_GL7: DMA1 Channel7 global interrupt.
  • DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt.
  • DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt.
  • DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt.
  • DMA2_IT_GL1: DMA2 Channel1 global interrupt.
  • DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt.
  • DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt.
  • DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt.
  • DMA2_IT_GL2: DMA2 Channel2 global interrupt.
  • DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt.
  • DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt.
  • DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt.
  • DMA2_IT_GL3: DMA2 Channel3 global interrupt.
  • DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt.
  • DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt.
  • DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt.
  • DMA2_IT_GL4: DMA2 Channel4 global interrupt.
  • DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt.
  • DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt.
  • DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt.
  • DMA2_IT_GL5: DMA2 Channel5 global interrupt.
  • DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt.
  • DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt.
  • DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt.
Return values
Thenew state of DMAy_IT (SET or RESET).

Definition at line 595 of file stm32f10x_dma.c.

void DMA_Init ( DMA_Channel_TypeDef DMAy_Channelx,
DMA_InitTypeDef DMA_InitStruct 
)

Initializes the DMAy Channelx according to the specified parameters in the DMA_InitStruct.

Parameters
DMAy_Channelx,:where y can be 1 or 2 to select the DMA and x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
DMA_InitStruct,:pointer to a DMA_InitTypeDef structure that contains the configuration information for the specified DMA Channel.
Return values
None

Definition at line 202 of file stm32f10x_dma.c.

void DMA_ITConfig ( DMA_Channel_TypeDef DMAy_Channelx,
uint32_t  DMA_IT,
FunctionalState  NewState 
)

Enables or disables the specified DMAy Channelx interrupts.

Parameters
DMAy_Channelx,:where y can be 1 or 2 to select the DMA and x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
DMA_IT,:specifies the DMA interrupts sources to be enabled or disabled. This parameter can be any combination of the following values:
  • DMA_IT_TC: Transfer complete interrupt mask
  • DMA_IT_HT: Half transfer interrupt mask
  • DMA_IT_TE: Transfer error interrupt mask
NewState,:new state of the specified DMA interrupts. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 326 of file stm32f10x_dma.c.

void DMA_SetCurrDataCounter ( DMA_Channel_TypeDef DMAy_Channelx,
uint16_t  DataNumber 
)

Sets the number of data units in the current DMAy Channelx transfer.

Parameters
DMAy_Channelx,:where y can be 1 or 2 to select the DMA and x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
DataNumber,:The number of data units in the current DMAy Channelx transfer.
Note
This function can only be used when the DMAy_Channelx is disabled.
Return values
None.

Definition at line 353 of file stm32f10x_dma.c.

void DMA_StructInit ( DMA_InitTypeDef DMA_InitStruct)

Fills each DMA_InitStruct member with its default value.

Parameters
DMA_InitStruct: pointer to a DMA_InitTypeDef structure which will be initialized.
Return values
None

Definition at line 259 of file stm32f10x_dma.c.