Functions
void	DAC_DeInit (void)
	Deinitializes the DAC peripheral registers to their default reset values. More...

void	DAC_Init (uint32_t DAC_Channel, DAC_InitTypeDef *DAC_InitStruct)
	Initializes the DAC peripheral according to the specified parameters in the DAC_InitStruct. More...

void	DAC_StructInit (DAC_InitTypeDef *DAC_InitStruct)
	Fills each DAC_InitStruct member with its default value. More...

void	DAC_Cmd (uint32_t DAC_Channel, FunctionalState NewState)
	Enables or disables the specified DAC channel. More...

void	DAC_DMACmd (uint32_t DAC_Channel, FunctionalState NewState)
	Enables or disables the specified DAC channel DMA request. More...

void	DAC_SoftwareTriggerCmd (uint32_t DAC_Channel, FunctionalState NewState)
	Enables or disables the selected DAC channel software trigger. More...

void	DAC_DualSoftwareTriggerCmd (FunctionalState NewState)
	Enables or disables simultaneously the two DAC channels software triggers. More...

void	DAC_WaveGenerationCmd (uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState)
	Enables or disables the selected DAC channel wave generation. More...

void	DAC_SetChannel1Data (uint32_t DAC_Align, uint16_t Data)
	Set the specified data holding register value for DAC channel1. More...

void	DAC_SetChannel2Data (uint32_t DAC_Align, uint16_t Data)
	Set the specified data holding register value for DAC channel2. More...

void	DAC_SetDualChannelData (uint32_t DAC_Align, uint16_t Data2, uint16_t Data1)
	Set the specified data holding register value for dual channel DAC. More...

uint16_t	DAC_GetDataOutputValue (uint32_t DAC_Channel)
	Returns the last data output value of the selected DAC channel. More...

Detailed Description

Function Documentation

void DAC_Cmd	(	uint32_t	DAC_Channel,
		FunctionalState	NewState
	)

Enables or disables the specified DAC channel.

Parameters

DAC_Channel,:	the selected DAC channel. This parameter can be one of the following values: DAC_Channel_1: DAC Channel1 selected DAC_Channel_2: DAC Channel2 selected
NewState,:	new state of the DAC channel. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 173 of file stm32f10x_dac.c.

void DAC_DeInit ( void )

Deinitializes the DAC peripheral registers to their default reset values.

Parameters

None

Return values

None

Definition at line 98 of file stm32f10x_dac.c.

void DAC_DMACmd	(	uint32_t	DAC_Channel,
		FunctionalState	NewState
	)

Enables or disables the specified DAC channel DMA request.

Parameters

DAC_Channel,:	the selected DAC channel. This parameter can be one of the following values: DAC_Channel_1: DAC Channel1 selected DAC_Channel_2: DAC Channel2 selected
NewState,:	new state of the selected DAC channel DMA request. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 233 of file stm32f10x_dac.c.

void DAC_DualSoftwareTriggerCmd ( FunctionalState NewState)

Enables or disables simultaneously the two DAC channels software triggers.

Parameters

NewState,: new state of the DAC channels software triggers. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 284 of file stm32f10x_dac.c.

uint16_t DAC_GetDataOutputValue ( uint32_t DAC_Channel)

Returns the last data output value of the selected DAC channel.

Parameters

DAC_Channel,:

the selected DAC channel. This parameter can be one of the following values:

DAC_Channel_1: DAC Channel1 selected
DAC_Channel_2: DAC Channel2 selected

Return values

The	selected DAC channel data output value.

Definition at line 430 of file stm32f10x_dac.c.

void DAC_Init	(	uint32_t	DAC_Channel,
		DAC_InitTypeDef *	DAC_InitStruct
	)

Initializes the DAC peripheral according to the specified parameters in the DAC_InitStruct.

Parameters

DAC_Channel,:	the selected DAC channel. This parameter can be one of the following values: DAC_Channel_1: DAC Channel1 selected DAC_Channel_2: DAC Channel2 selected
DAC_InitStruct,:	pointer to a DAC_InitTypeDef structure that contains the configuration information for the specified DAC channel.

Return values

None

Definition at line 117 of file stm32f10x_dac.c.

void DAC_SetChannel1Data	(	uint32_t	DAC_Align,
		uint16_t	Data
	)

Set the specified data holding register value for DAC channel1.

Parameters

DAC_Align,:	Specifies the data alignment for DAC channel1. This parameter can be one of the following values: DAC_Align_8b_R: 8bit right data alignment selected DAC_Align_12b_L: 12bit left data alignment selected DAC_Align_12b_R: 12bit right data alignment selected
Data	: Data to be loaded in the selected data holding register.

Return values

None

Definition at line 342 of file stm32f10x_dac.c.

void DAC_SetChannel2Data	(	uint32_t	DAC_Align,
		uint16_t	Data
	)

Set the specified data holding register value for DAC channel2.

Parameters

DAC_Align,:	Specifies the data alignment for DAC channel2. This parameter can be one of the following values: DAC_Align_8b_R: 8bit right data alignment selected DAC_Align_12b_L: 12bit left data alignment selected DAC_Align_12b_R: 12bit right data alignment selected
Data	: Data to be loaded in the selected data holding register.

Return values

None

Definition at line 367 of file stm32f10x_dac.c.

void DAC_SetDualChannelData	(	uint32_t	DAC_Align,
		uint16_t	Data2,
		uint16_t	Data1
	)

Set the specified data holding register value for dual channel DAC.

Parameters

DAC_Align,:	Specifies the data alignment for dual channel DAC. This parameter can be one of the following values: DAC_Align_8b_R: 8bit right data alignment selected DAC_Align_12b_L: 12bit left data alignment selected DAC_Align_12b_R: 12bit right data alignment selected
Data2,:	Data for DAC Channel2 to be loaded in the selected data holding register.
Data1,:	Data for DAC Channel1 to be loaded in the selected data holding register.

Return values

None

Definition at line 396 of file stm32f10x_dac.c.

void DAC_SoftwareTriggerCmd	(	uint32_t	DAC_Channel,
		FunctionalState	NewState
	)

Enables or disables the selected DAC channel software trigger.

Parameters

DAC_Channel,:	the selected DAC channel. This parameter can be one of the following values: DAC_Channel_1: DAC Channel1 selected DAC_Channel_2: DAC Channel2 selected
NewState,:	new state of the selected DAC channel software trigger. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 260 of file stm32f10x_dac.c.

void DAC_StructInit ( DAC_InitTypeDef * DAC_InitStruct)

Fills each DAC_InitStruct member with its default value.

Parameters

DAC_InitStruct : pointer to a DAC_InitTypeDef structure which will be initialized.

Return values

None

Definition at line 150 of file stm32f10x_dac.c.

void DAC_WaveGenerationCmd	(	uint32_t	DAC_Channel,
		uint32_t	DAC_Wave,
		FunctionalState	NewState
	)

Enables or disables the selected DAC channel wave generation.

Parameters

DAC_Channel,:	the selected DAC channel. This parameter can be one of the following values: DAC_Channel_1: DAC Channel1 selected DAC_Channel_2: DAC Channel2 selected
DAC_Wave,:	Specifies the wave type to enable or disable. This parameter can be one of the following values: DAC_Wave_Noise: noise wave generation DAC_Wave_Triangle: triangle wave generation
NewState,:	new state of the selected DAC channel wave generation. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 314 of file stm32f10x_dac.c.

Functions

Detailed Description

Function Documentation