ADC_Private_Functions

Functions
void	ADC_DeInit (ADC_TypeDef *ADCx)
	Deinitializes the ADCx peripheral registers to their default reset values. More...
void	ADC_Init (ADC_TypeDef *ADCx, ADC_InitTypeDef *ADC_InitStruct)
	Initializes the ADCx peripheral according to the specified parameters in the ADC_InitStruct. More...
void	ADC_StructInit (ADC_InitTypeDef *ADC_InitStruct)
	Fills each ADC_InitStruct member with its default value. More...
void	ADC_Cmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the specified ADC peripheral. More...
void	ADC_DMACmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the specified ADC DMA request. More...
void	ADC_ITConfig (ADC_TypeDef *ADCx, uint16_t ADC_IT, FunctionalState NewState)
	Enables or disables the specified ADC interrupts. More...
void	ADC_ResetCalibration (ADC_TypeDef *ADCx)
	Resets the selected ADC calibration registers. More...
FlagStatus	ADC_GetResetCalibrationStatus (ADC_TypeDef *ADCx)
	Gets the selected ADC reset calibration registers status. More...
void	ADC_StartCalibration (ADC_TypeDef *ADCx)
	Starts the selected ADC calibration process. More...
FlagStatus	ADC_GetCalibrationStatus (ADC_TypeDef *ADCx)
	Gets the selected ADC calibration status. More...
void	ADC_SoftwareStartConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the selected ADC software start conversion . More...
FlagStatus	ADC_GetSoftwareStartConvStatus (ADC_TypeDef *ADCx)
	Gets the selected ADC Software start conversion Status. More...
void	ADC_DiscModeChannelCountConfig (ADC_TypeDef *ADCx, uint8_t Number)
	Configures the discontinuous mode for the selected ADC regular group channel. More...
void	ADC_DiscModeCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the discontinuous mode on regular group channel for the specified ADC. More...
void	ADC_RegularChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
	Configures for the selected ADC regular channel its corresponding rank in the sequencer and its sample time. More...
void	ADC_ExternalTrigConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the ADCx conversion through external trigger. More...
uint16_t	ADC_GetConversionValue (ADC_TypeDef *ADCx)
	Returns the last ADCx conversion result data for regular channel. More...
uint32_t	ADC_GetDualModeConversionValue (void)
	Returns the last ADC1 and ADC2 conversion result data in dual mode. More...
void	ADC_AutoInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the selected ADC automatic injected group conversion after regular one. More...
void	ADC_InjectedDiscModeCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the discontinuous mode for injected group channel for the specified ADC. More...
void	ADC_ExternalTrigInjectedConvConfig (ADC_TypeDef *ADCx, uint32_t ADC_ExternalTrigInjecConv)
	Configures the ADCx external trigger for injected channels conversion. More...
void	ADC_ExternalTrigInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the ADCx injected channels conversion through external trigger. More...
void	ADC_SoftwareStartInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the selected ADC start of the injected channels conversion. More...
FlagStatus	ADC_GetSoftwareStartInjectedConvCmdStatus (ADC_TypeDef *ADCx)
	Gets the selected ADC Software start injected conversion Status. More...
void	ADC_InjectedChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
	Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time. More...
void	ADC_InjectedSequencerLengthConfig (ADC_TypeDef *ADCx, uint8_t Length)
	Configures the sequencer length for injected channels. More...
void	ADC_SetInjectedOffset (ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset)
	Set the injected channels conversion value offset. More...
uint16_t	ADC_GetInjectedConversionValue (ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel)
	Returns the ADC injected channel conversion result. More...
void	ADC_AnalogWatchdogCmd (ADC_TypeDef *ADCx, uint32_t ADC_AnalogWatchdog)
	Enables or disables the analog watchdog on single/all regular or injected channels. More...
void	ADC_AnalogWatchdogThresholdsConfig (ADC_TypeDef *ADCx, uint16_t HighThreshold, uint16_t LowThreshold)
	Configures the high and low thresholds of the analog watchdog. More...
void	ADC_AnalogWatchdogSingleChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel)
	Configures the analog watchdog guarded single channel. More...
void	ADC_TempSensorVrefintCmd (FunctionalState NewState)
	Enables or disables the temperature sensor and Vrefint channel. More...
FlagStatus	ADC_GetFlagStatus (ADC_TypeDef *ADCx, uint8_t ADC_FLAG)
	Checks whether the specified ADC flag is set or not. More...
void	ADC_ClearFlag (ADC_TypeDef *ADCx, uint8_t ADC_FLAG)
	Clears the ADCx's pending flags. More...
ITStatus	ADC_GetITStatus (ADC_TypeDef *ADCx, uint16_t ADC_IT)
	Checks whether the specified ADC interrupt has occurred or not. More...
void	ADC_ClearITPendingBit (ADC_TypeDef *ADCx, uint16_t ADC_IT)
	Clears the ADCx's interrupt pending bits. More...

Detailed Description

Function Documentation

void ADC_AnalogWatchdogCmd	(	ADC_TypeDef *	ADCx,
		uint32_t	ADC_AnalogWatchdog
	)

Enables or disables the analog watchdog on single/all regular or injected channels.

Parameters

ADCx,:

where x can be 1, 2 or 3 to select the ADC peripheral.

ADC_AnalogWatchdog,:

the ADC analog watchdog configuration. This parameter can be one of the following values: ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single regular channel ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single injected channel ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a single regular or injected channel ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on all regular channel ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on all injected channel ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all regular and injected channels ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog

Return values

None

Definition at line 1082 of file stm32f10x_adc.c.

void ADC_AnalogWatchdogSingleChannelConfig	(	ADC_TypeDef *	ADCx,
		uint8_t	ADC_Channel
	)

Configures the analog watchdog guarded single channel.

Parameters

ADCx,:

where x can be 1, 2 or 3 to select the ADC peripheral.

ADC_Channel,:

the ADC channel to configure for the analog watchdog. This parameter can be one of the following values: ADC_Channel_0: ADC Channel0 selected ADC_Channel_1: ADC Channel1 selected ADC_Channel_2: ADC Channel2 selected ADC_Channel_3: ADC Channel3 selected ADC_Channel_4: ADC Channel4 selected ADC_Channel_5: ADC Channel5 selected ADC_Channel_6: ADC Channel6 selected ADC_Channel_7: ADC Channel7 selected ADC_Channel_8: ADC Channel8 selected ADC_Channel_9: ADC Channel9 selected ADC_Channel_10: ADC Channel10 selected ADC_Channel_11: ADC Channel11 selected ADC_Channel_12: ADC Channel12 selected ADC_Channel_13: ADC Channel13 selected ADC_Channel_14: ADC Channel14 selected ADC_Channel_15: ADC Channel15 selected ADC_Channel_16: ADC Channel16 selected ADC_Channel_17: ADC Channel17 selected

Return values

None

Definition at line 1145 of file stm32f10x_adc.c.

void ADC_AnalogWatchdogThresholdsConfig	(	ADC_TypeDef *	ADCx,
		uint16_t	HighThreshold,
		uint16_t	LowThreshold
	)

Configures the high and low thresholds of the analog watchdog.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
HighThreshold,:	the ADC analog watchdog High threshold value. This parameter must be a 12bit value.
LowThreshold,:	the ADC analog watchdog Low threshold value. This parameter must be a 12bit value.

Return values

None

Definition at line 1107 of file stm32f10x_adc.c.

void ADC_AutoInjectedConvCmd	(	ADC_TypeDef *	ADCx,
		FunctionalState	NewState
	)

Enables or disables the selected ADC automatic injected group conversion after regular one.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
NewState,:	new state of the selected ADC auto injected conversion This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 734 of file stm32f10x_adc.c.

void ADC_ClearFlag	(	ADC_TypeDef *	ADCx,
		uint8_t	ADC_FLAG
	)

Clears the ADCx's pending flags.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_FLAG,:	specifies the flag to clear. This parameter can be any combination of the following values: ADC_FLAG_AWD: Analog watchdog flag ADC_FLAG_EOC: End of conversion flag ADC_FLAG_JEOC: End of injected group conversion flag ADC_FLAG_JSTRT: Start of injected group conversion flag ADC_FLAG_STRT: Start of regular group conversion flag

Return values

None

Definition at line 1228 of file stm32f10x_adc.c.

void ADC_ClearITPendingBit	(	ADC_TypeDef *	ADCx,
		uint16_t	ADC_IT
	)

Clears the ADCx's interrupt pending bits.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_IT,:	specifies the ADC interrupt pending bit to clear. This parameter can be any combination of the following values: ADC_IT_EOC: End of conversion interrupt mask ADC_IT_AWD: Analog watchdog interrupt mask ADC_IT_JEOC: End of injected conversion interrupt mask

Return values

None

Definition at line 1283 of file stm32f10x_adc.c.

void ADC_Cmd	(	ADC_TypeDef *	ADCx,
		FunctionalState	NewState
	)

Enables or disables the specified ADC peripheral.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
NewState,:	new state of the ADCx peripheral. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 299 of file stm32f10x_adc.c.

void ADC_DeInit

(

ADC_TypeDef *

ADCx)

Deinitializes the ADCx peripheral registers to their default reset values.

Parameters

ADCx,:

where x can be 1, 2 or 3 to select the ADC peripheral.

Return values

None

Definition at line 179 of file stm32f10x_adc.c.

void ADC_DiscModeChannelCountConfig	(	ADC_TypeDef *	ADCx,
		uint8_t	Number
	)

Configures the discontinuous mode for the selected ADC regular group channel.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
Number,:	specifies the discontinuous mode regular channel count value. This number must be between 1 and 8.

Return values

None

Definition at line 509 of file stm32f10x_adc.c.

void ADC_DiscModeCmd	(	ADC_TypeDef *	ADCx,
		FunctionalState	NewState
	)

Enables or disables the discontinuous mode on regular group channel for the specified ADC.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
NewState,:	new state of the selected ADC discontinuous mode on regular group channel. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 536 of file stm32f10x_adc.c.

void ADC_DMACmd	(	ADC_TypeDef *	ADCx,
		FunctionalState	NewState
	)

Enables or disables the specified ADC DMA request.

Parameters

ADCx,:	where x can be 1 or 3 to select the ADC peripheral. Note: ADC2 hasn't a DMA capability.
NewState,:	new state of the selected ADC DMA transfer. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 324 of file stm32f10x_adc.c.

void ADC_ExternalTrigConvCmd	(	ADC_TypeDef *	ADCx,
		FunctionalState	NewState
	)

Enables or disables the ADCx conversion through external trigger.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
NewState,:	new state of the selected ADC external trigger start of conversion. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 686 of file stm32f10x_adc.c.

void ADC_ExternalTrigInjectedConvCmd	(	ADC_TypeDef *	ADCx,
		FunctionalState	NewState
	)

Enables or disables the ADCx injected channels conversion through external trigger.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
NewState,:	new state of the selected ADC external trigger start of injected conversion. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 824 of file stm32f10x_adc.c.

void ADC_ExternalTrigInjectedConvConfig	(	ADC_TypeDef *	ADCx,
		uint32_t	ADC_ExternalTrigInjecConv
	)

Configures the ADCx external trigger for injected channels conversion.

Parameters

ADCx,:

where x can be 1, 2 or 3 to select the ADC peripheral.

ADC_ExternalTrigInjecConv,:

specifies the ADC trigger to start injected conversion. This parameter can be one of the following values: ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected (for ADC1, ADC2 and ADC3) ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected (for ADC1, ADC2 and ADC3) ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected (for ADC1 and ADC2) ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected (for ADC1 and ADC2) ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected (for ADC1 and ADC2) ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected (for ADC1 and ADC2) ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4: External interrupt line 15 or Timer8 capture compare4 event selected (for ADC1 and ADC2) ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected (for ADC3 only) ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected (for ADC3 only) ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected (for ADC3 only) ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected (for ADC3 only) ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected (for ADC3 only) ADC_ExternalTrigInjecConv_None: Injected conversion started by software and not by external trigger (for ADC1, ADC2 and ADC3)

Return values

None

Definition at line 799 of file stm32f10x_adc.c.

FlagStatus ADC_GetCalibrationStatus

(

ADC_TypeDef *

ADCx)

Gets the selected ADC calibration status.

Parameters

ADCx,:

where x can be 1, 2 or 3 to select the ADC peripheral.

Return values

The	new state of ADC calibration (SET or RESET).

Definition at line 430 of file stm32f10x_adc.c.

uint16_t ADC_GetConversionValue

(

ADC_TypeDef *

ADCx)

Returns the last ADCx conversion result data for regular channel.

Parameters

ADCx,:

where x can be 1, 2 or 3 to select the ADC peripheral.

Return values

The	Data conversion value.

Definition at line 708 of file stm32f10x_adc.c.

uint32_t ADC_GetDualModeConversionValue

(

void

)

Returns the last ADC1 and ADC2 conversion result data in dual mode.

Return values

The	Data conversion value.

Definition at line 720 of file stm32f10x_adc.c.

FlagStatus ADC_GetFlagStatus	(	ADC_TypeDef *	ADCx,
		uint8_t	ADC_FLAG
	)

Checks whether the specified ADC flag is set or not.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_FLAG,:	specifies the flag to check. This parameter can be one of the following values: ADC_FLAG_AWD: Analog watchdog flag ADC_FLAG_EOC: End of conversion flag ADC_FLAG_JEOC: End of injected group conversion flag ADC_FLAG_JSTRT: Start of injected group conversion flag ADC_FLAG_STRT: Start of regular group conversion flag

Return values

The	new state of ADC_FLAG (SET or RESET).

Definition at line 1195 of file stm32f10x_adc.c.

uint16_t ADC_GetInjectedConversionValue	(	ADC_TypeDef *	ADCx,
		uint8_t	ADC_InjectedChannel
	)

Returns the ADC injected channel conversion result.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_InjectedChannel,:	the converted ADC injected channel. This parameter can be one of the following values: ADC_InjectedChannel_1: Injected Channel1 selected ADC_InjectedChannel_2: Injected Channel2 selected ADC_InjectedChannel_3: Injected Channel3 selected ADC_InjectedChannel_4: Injected Channel4 selected

Return values

The	Data conversion value.

Definition at line 1052 of file stm32f10x_adc.c.

ITStatus ADC_GetITStatus	(	ADC_TypeDef *	ADCx,
		uint16_t	ADC_IT
	)

Checks whether the specified ADC interrupt has occurred or not.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_IT,:	specifies the ADC interrupt source to check. This parameter can be one of the following values: ADC_IT_EOC: End of conversion interrupt mask ADC_IT_AWD: Analog watchdog interrupt mask ADC_IT_JEOC: End of injected conversion interrupt mask

Return values

The	new state of ADC_IT (SET or RESET).

Definition at line 1247 of file stm32f10x_adc.c.

FlagStatus ADC_GetResetCalibrationStatus

(

ADC_TypeDef *

ADCx)

Gets the selected ADC reset calibration registers status.

Parameters

ADCx,:

where x can be 1, 2 or 3 to select the ADC peripheral.

Return values

The	new state of ADC reset calibration registers (SET or RESET).

Definition at line 392 of file stm32f10x_adc.c.

FlagStatus ADC_GetSoftwareStartConvStatus

(

ADC_TypeDef *

ADCx)

Gets the selected ADC Software start conversion Status.

Parameters

ADCx,:

where x can be 1, 2 or 3 to select the ADC peripheral.

Return values

The	new state of ADC software start conversion (SET or RESET).

Definition at line 481 of file stm32f10x_adc.c.

FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus

(

ADC_TypeDef *

ADCx)

Gets the selected ADC Software start injected conversion Status.

Parameters

ADCx,:

where x can be 1, 2 or 3 to select the ADC peripheral.

Return values

The	new state of ADC software start injected conversion (SET or RESET).

Definition at line 873 of file stm32f10x_adc.c.

void ADC_Init	(	ADC_TypeDef *	ADCx,
		ADC_InitTypeDef *	ADC_InitStruct
	)

Initializes the ADCx peripheral according to the specified parameters in the ADC_InitStruct.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_InitStruct,:	pointer to an ADC_InitTypeDef structure that contains the configuration information for the specified ADC peripheral.

Return values

None

Definition at line 218 of file stm32f10x_adc.c.

void ADC_InjectedChannelConfig	(	ADC_TypeDef *	ADCx,
		uint8_t	ADC_Channel,
		uint8_t	Rank,
		uint8_t	ADC_SampleTime
	)

Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_Channel,:	the ADC channel to configure. This parameter can be one of the following values: ADC_Channel_0: ADC Channel0 selected ADC_Channel_1: ADC Channel1 selected ADC_Channel_2: ADC Channel2 selected ADC_Channel_3: ADC Channel3 selected ADC_Channel_4: ADC Channel4 selected ADC_Channel_5: ADC Channel5 selected ADC_Channel_6: ADC Channel6 selected ADC_Channel_7: ADC Channel7 selected ADC_Channel_8: ADC Channel8 selected ADC_Channel_9: ADC Channel9 selected ADC_Channel_10: ADC Channel10 selected ADC_Channel_11: ADC Channel11 selected ADC_Channel_12: ADC Channel12 selected ADC_Channel_13: ADC Channel13 selected ADC_Channel_14: ADC Channel14 selected ADC_Channel_15: ADC Channel15 selected ADC_Channel_16: ADC Channel16 selected ADC_Channel_17: ADC Channel17 selected
Rank,:	The rank in the injected group sequencer. This parameter must be between 1 and 4.
ADC_SampleTime,:	The sample time value to be set for the selected channel. This parameter can be one of the following values: ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles

Return values

None

Definition at line 930 of file stm32f10x_adc.c.

void ADC_InjectedDiscModeCmd	(	ADC_TypeDef *	ADCx,
		FunctionalState	NewState
	)

Enables or disables the discontinuous mode for injected group channel for the specified ADC.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
NewState,:	new state of the selected ADC discontinuous mode on injected group channel. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 760 of file stm32f10x_adc.c.

void ADC_InjectedSequencerLengthConfig	(	ADC_TypeDef *	ADCx,
		uint8_t	Length
	)

Configures the sequencer length for injected channels.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
Length,:	The sequencer length. This parameter must be a number between 1 to 4.

Return values

None

Definition at line 993 of file stm32f10x_adc.c.

void ADC_ITConfig	(	ADC_TypeDef *	ADCx,
		uint16_t	ADC_IT,
		FunctionalState	NewState
	)

Enables or disables the specified ADC interrupts.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_IT,:	specifies the ADC interrupt sources to be enabled or disabled. This parameter can be any combination of the following values: ADC_IT_EOC: End of conversion interrupt mask ADC_IT_AWD: Analog watchdog interrupt mask ADC_IT_JEOC: End of injected conversion interrupt mask
NewState,:	new state of the specified ADC interrupts. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 353 of file stm32f10x_adc.c.

void ADC_RegularChannelConfig	(	ADC_TypeDef *	ADCx,
		uint8_t	ADC_Channel,
		uint8_t	Rank,
		uint8_t	ADC_SampleTime
	)

Configures for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_Channel,:	the ADC channel to configure. This parameter can be one of the following values: ADC_Channel_0: ADC Channel0 selected ADC_Channel_1: ADC Channel1 selected ADC_Channel_2: ADC Channel2 selected ADC_Channel_3: ADC Channel3 selected ADC_Channel_4: ADC Channel4 selected ADC_Channel_5: ADC Channel5 selected ADC_Channel_6: ADC Channel6 selected ADC_Channel_7: ADC Channel7 selected ADC_Channel_8: ADC Channel8 selected ADC_Channel_9: ADC Channel9 selected ADC_Channel_10: ADC Channel10 selected ADC_Channel_11: ADC Channel11 selected ADC_Channel_12: ADC Channel12 selected ADC_Channel_13: ADC Channel13 selected ADC_Channel_14: ADC Channel14 selected ADC_Channel_15: ADC Channel15 selected ADC_Channel_16: ADC Channel16 selected ADC_Channel_17: ADC Channel17 selected
Rank,:	The rank in the regular group sequencer. This parameter must be between 1 to 16.
ADC_SampleTime,:	The sample time value to be set for the selected channel. This parameter can be one of the following values: ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles

Return values

None

Definition at line 590 of file stm32f10x_adc.c.

void ADC_ResetCalibration

(

ADC_TypeDef *

ADCx)

Resets the selected ADC calibration registers.

Parameters

ADCx,:

where x can be 1, 2 or 3 to select the ADC peripheral.

Return values

None

Definition at line 379 of file stm32f10x_adc.c.

void ADC_SetInjectedOffset	(	ADC_TypeDef *	ADCx,
		uint8_t	ADC_InjectedChannel,
		uint16_t	Offset
	)

Set the injected channels conversion value offset.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_InjectedChannel,:	the ADC injected channel to set its offset. This parameter can be one of the following values: ADC_InjectedChannel_1: Injected Channel1 selected ADC_InjectedChannel_2: Injected Channel2 selected ADC_InjectedChannel_3: Injected Channel3 selected ADC_InjectedChannel_4: Injected Channel4 selected
Offset,:	the offset value for the selected ADC injected channel This parameter must be a 12bit value.

Return values

None

Definition at line 1025 of file stm32f10x_adc.c.

void ADC_SoftwareStartConvCmd	(	ADC_TypeDef *	ADCx,
		FunctionalState	NewState
	)

Enables or disables the selected ADC software start conversion .

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
NewState,:	new state of the selected ADC software start conversion. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 457 of file stm32f10x_adc.c.

void ADC_SoftwareStartInjectedConvCmd	(	ADC_TypeDef *	ADCx,
		FunctionalState	NewState
	)

Enables or disables the selected ADC start of the injected channels conversion.

Parameters

ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
NewState,:	new state of the selected ADC software start injected conversion. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 849 of file stm32f10x_adc.c.

void ADC_StartCalibration

(

ADC_TypeDef *

ADCx)

Starts the selected ADC calibration process.

Parameters

ADCx,:

where x can be 1, 2 or 3 to select the ADC peripheral.

Return values

None

Definition at line 417 of file stm32f10x_adc.c.

void ADC_StructInit

(

ADC_InitTypeDef *

ADC_InitStruct)

Fills each ADC_InitStruct member with its default value.

Parameters

ADC_InitStruct

: pointer to an ADC_InitTypeDef structure which will be initialized.

Return values

None

Definition at line 275 of file stm32f10x_adc.c.

void ADC_TempSensorVrefintCmd

(

FunctionalState

NewState)

Enables or disables the temperature sensor and Vrefint channel.

Parameters

NewState,:

new state of the temperature sensor. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 1167 of file stm32f10x_adc.c.